- Car Reversing Aid[10]
- Parking Equipment[2]
- Car Alarms[2]
- Auto Sensors[1]
- Alarm[1]
- Navigation & GPS[9]
- Other Auto Electronics[4]
- CCTV Camera[2]
- Webcams[3]
- Contact Person : Mr. Lv Wenyu
- Company Name : Shenzhen CBS Electronic Technology Co., Ltd.
- Tel : 0086-755-84883959
- Fax : 0086-755-28306660
- Address : Guangdong,Shenzhen,No.64 Longhu Rd. Longdong industrial area, Longgang district
- Country/Region : China
- Zip : 518116
4 sensors LED parking Sensor with thermometer
Parking Sensor, LED Parking Sensor,Car Parking Sensor System:
7 bands 3 colors digital LED display with bracket.
Detachable display and cable
Fit any make of car or vehicle, van, caravan, trailer and horse boxes.
sound ON/OFF switch
stage-by stage sound alarm to avoid collision
Digital meter distance mode
Directional indicator of left and right
Waterproof and shockproof, anti-fault information technology
More-stable two-angle sensor,horizontal and vertical for detection
All kinds of sensor colors and styles are avaiable
High quality and easy to install
Technical Specification:1)Car Entry Level Rear 4 Parking Sensor System2) Sensor detection range: 20cm~2.5m 3) Display range: 0cm~2.5m 5) 8/6/4/3/2 sensor optional6) Bi Bi Bi Alarm voice:>80dB.7)Ultrasonic Frequency:40KHz8) 3 color LED 4 channel w/ digital readout,Built-in buzzer9) Rated Current:20-200mA10) Power Input: 9~16V DC11)Working temperature:-30~+70°C12) Display working temperature:-20~+60°C
Alarm:
Section | distance | region | Distance value | sound | Indicator color |
1 | 100-250 c m | safe | 1.0-2.50m | Bi-----Bi | Green |
2 | 50-100 c m | Warning | 0.5-1.00m | Bi-Bi-Bi | Yellow |
3 | 20-50 c m | Dangerous | 0.2-0.50m | BiBiBi | red |
ACCESSORY:Power Supply Cable 1PCS(clue 0.8M)Sensor Cables 4PCS(clue 2.5M)Display Cable 1PCS(clue 5M)Buzzer Cable 1PCS3M Self-Adhesive Tape or Velcro 1PCSHigh Quality Driller 1PCS(22mm)lnstallation Manual 1PCSSensor Spacers 4PCS
Operation * Start up reversing system, reversing lights flash and buzzer sounds "Bi", then parking sensor turns on automatically. * When vehicle reverse away 2.50 meters from obstacle, digital LED shows obstacle place and distance * Install LED * Fix LED with 3M double glue sticker on a suitable place of driving room * Install Control Box * Fix Control Box with 3m double glue sticker in a suitable place in truck * Wire Connection * Lead the wire into vehicle truck suitable place through holes on vehicle and bundle wire, then connect detector, control box and color digital LED described as illustration. Finally connect the positive and negative power wire with the according color power wire on reversing light * Test and Adjust * After installation completion, to test according to "OPERATION". Free to choose the probe quantity, but shall connect probe according to label requirement.
4 sensors LED parking Sensor with thermometer