CBS-02Q Led display Parking Sensor system

CBS-02Q Led display Parking Sensor system 1 BiBi-alarm voice indicator 2 led display 0.3-2.5m 3 Waterproof

CBS-02Q Led display Parking Sensor system

Brand New 4sensors LCD Display Car Parking Sensor System

Features

7 bands 3 colors digital LED display with bracket.

Detachable display and cable

Fit any make of car or vehicle, van, caravan, trailer etc.

sound ON/OFF switch

stage-by stage sound alarm to avoid collision

Digital meter distance mode

Directional indicator of left and right

Waterproof and shockproof, anti-fault information technology

More-stable two-angle sensor,horizontal and vertical for detection

All kinds of sensor colors and styles are avaiable

High quality and easy to install

Alarm:

Section	distance	region	Distance value	sound	Indicator color
1	100-250 c m	safe	1.0-2.50m	Bi-----Bi	Green
2	50-100 c m	Warning	0.5-1.00m	Bi-Bi-Bi	Yellow
3	20-50 c m	Dangerous	0.2-0.50m	BiBiBi	red

Technical Specification:1)Car Entry Level Rear 4 Parking Sensor System2) Sensor detection range: 20cm~2.5m 3) Display range: 40cm~2.5m 4) 22mm plastic flat5) 8/6/4/3/2 sensor optional6) Bi Bi Bi Alarm voice:>80dB.7)Ultrasonic Frequency:40KHz8) 3 color LED 4 channel w/ digital readout,Built-in buzzer9) Rated Current:20-200mA10) Power Input: 9~16V DC11)Working temperature:-30~+70°C12) Display working temperature:-20~+60°C

ACCESSORY:Power Supply Cable 1PCS(clue 0.8M)Sensor Cables 4PCS(clue 2.5M)Display Cable 1PCS(clue 5M)3M Self-Adhesive Tape or Velcro 1PCSHigh Quality Driller 1PCS(22mm)lnstallation Manual 1PCSSensor Spacers 4PCS

Operation * Start up reversing system, reversing lights flash and buzzer sounds "Bi", then parking sensor turns on automatically. * When vehicle reverse away 2.50 meters from obstacle, digital LED shows obstacle place and distance * Install LED * Fix LED with 3M double glue sticker on a suitable place of driving room * Install Control Box * Fix Control Box with 3m double glue sticker in a suitable place in truck * Wire Connection * Lead the wire into vehicle truck suitable place through holes on vehicle and bundle wire, then connect detector, control box and color digital LED described as illustration. Finally connect the positive and negative power wire with the according color power wire on reversing light * Test and Adjust * After installation completion, to test according to "OPERATION". Free to choose the probe quantity, but shall connect probe according to label requirement.

CBS-02Q Led display Parking Sensor system